If your site discharges wastewater, you need a licence for it, and in most cases you need a system that keeps that discharge within the licence. Skip either step and it could cost you: charges climb once effluent falls outside consent limits, and a breach is an offence. Our latest blog covers what to know before you plan any treatment work, from who licenses what through to staying compliant once a system is running.

Why treat wastewater on site

Most sites A few reasons this pays off:

  • It avoids the disruption of a breach investigation landing mid-production.
  • It keeps you inside your licence, and most processes produce effluent well above what can go out untreated.
  • It controls cost. Charges rise sharply once effluent sits outside the agreed consent.
  • It protects your own infrastructure as much as the public network downstream.

Treatment technology on site

Most of the work centres on chemical dosing and pH correction. These adjust the effluent before it leaves the site so it falls within licence limits. Campion designs, installs and commissions these systems, alongside UV disinfection and the drainage and sewage pumping equipment that moves the effluent through the process, as part of a site’s wider wastewater setup.

The right combination depends on what the site actually produces, so the starting point is always the effluent itself, not a standard package applied regardless of site. More on dosing specifically: Advanced dosing systems for precise water treatment.

Campions Wasterwater pumping system for Bulmers

Campion’s approach to treatment projects

Campion’s approach starts with a site survey. Campion assesses the existing equipment against the licence, then designs a system around the site’s actual requirements. Design is carried out in-house, and Campion works independently or alongside your consultants. Campion also handles installation and commissioning, with phased delivery where the site cannot afford disruption. 

That design work draws on Campion’s engineering expertise across  a range of water and wastewater treatment technologies, supported by integrated pumping systems, control equipment and automation. Each solution is developed around the site’s operating conditions, treatment requirements and long-term performance objectives. 

Campion’s recent landfill leachate management case study shows this approach on EPA-licensed sites. It covers the site survey and in-house design, and Campion Connect provides real-time monitoring, alerts and compliance reports.

Choosing the right equipment

A few things worth confirming before any equipment is chosen:

  • Characterise the effluent, volume, composition, and how it varies through the day.
  • Confirm which licence applies, since that sets the limits the system has to hit.
  • Size for peak load, not average, so it holds up on the busiest day.
  • Leave room to grow, if expansion is on the cards.
  • Build in monitoring from day one, so drift gets caught before it becomes a breach.

Monitoring with Campion Connect

Campion Connect gives real-time visibility of parameters such as flow, levels, conductivity and pump status across a site’s water and wastewater system. Automated alerts flag a fault as it develops, and compliance reports come from the same data.

For compliance, a problem shows up as an alert instead of a failed sample days later. For performance, equipment data shows how the system is actually running, so maintenance is planned around evidence. On Campion’s Bulmers UV upgrade, Connect monitored UV intensity and flow rates and fed an alarm output for offsite monitoring.

Staying compliant after installation

A licence doesn’t end at commissioning. You still need ongoing sampling and records, and the regulator can ask to see them at any point, not just at renewal. Servicing keeps the equipment performing as the site changes, and Campion offers annual preventative maintenance contracts alongside reactive call-out.

More on choosing a system in general: How to choose the right water treatment solution for your needs.

Campion Connect

Upgrades, assessments and servicing

A system that met its licence at commissioning needs looking after to keep meeting it. Production volumes change and equipment wears, and each of those moves the discharge closer to its consent limits. An assessment finds the gap before a sample does. Campion surveys existing systems and designs the upgrade they need, and a servicing contract keeps the result performing.

To arrange an assessment or plan an upgrade, talk to Campion Pumps’ water treatment team.

Frequently asked questions

Do I need a licence if I discharge to a watercourse instead of a sewer?

Yes. It’s a different licence, usually issued by the local authority instead of Uisce Éireann, but it’s still required.

What happens if I discharge without a licence?

It’s an offence, and it can also put any future licence application at risk.

Can an existing system be upgraded instead of replaced?

Often, yes. A site survey is usually the starting point for confirming what a current setup can take on, and Campion’s survey identifies the gaps an upgrade needs to close.

What records do you need to keep for compliance?

Licences typically require sampling and analysis of the discharge, along with records of its nature, composition and volume. These need to be available to the regulator on request, not just when the licence comes up for renewal.

How does Campion support compliance after installation? 

Campion Connect provides real-time monitoring, automated alerts and compliance reports, and a scheduled maintenance contract covers servicing, so issues get caught early instead of at the next inspection.

Related News